MADE IN USA

64 impala door panels

27Jun 2017
steve griffin
I bought exact replica door panels for my 2 door hardtop impala. My question/concern is this: the "Xmas trees" on the inside do not match up with the existing holes on the door, have any of you ran into this situation and how did you resolve it?

7Jul 2017
Mr Bowtie
Check to make sure your top rail is not bent or binding anywhere. If you installed the felt kit on the top rails, make sure the screw or rivet, or staple or what ever method you used is fit flush on the back side of the top rails. Otherwise this will keep the top rail from going all the way down on the door, making the nails mismatched from the holes.
7Jul 2017
Mr Bowtie
Check to make sure your top rail is not bent or binding anywhere. If you installed the felt kit on the top rails, make sure the screw or rivet, or staple or what ever method you used is fit flush on the back side of the top rails. Otherwise this will keep the top rail from going all the way down on the door, making the nails mismatched from the holes.

Return to list